Replace the glass or the whole window?

Use the glass, sash and frame condition to decide whether to ask for a glass-only repair, a replacement sash or an entire window.

Reviewed

When can you keep the existing window?

Ask about replacing the sealed glass unit if the problem is isolated to the glass, the sash and frame are sound, and the window can accept a compatible unit. If the manufacturer supplies a glazed sash as the service part, ask whether that sash fits the existing frame. If the sill or frame is soft, distorted or letting water into the wall, have the opening inspected before choosing a repair.

An insulated glass unit (IGU) contains the sealed panes. The sash holds the glass, and the frame sits in the wall opening. A quote that says “window glass replacement” should identify which of those parts it covers.

What to have checked before asking for a price

What you seeWhat to ask the installer to check
Fog between the panes of a sealed unitMoisture between sealed panes can indicate a failed seal. Ask whether a compatible sealed unit or glazed sash is available. See how Andersen distinguishes condensation locations.
Moisture you can wipe from the room-side glassCheck whether the moisture comes from room humidity meeting a cold surface.
A draft or a sash that won’t close properlyAsk whether the leak or binding is at the sash, weatherstripping or frame, and whether parts are available.
Soft sill, staining below the opening or recurring leaksAsk the installer to trace the water source and assess the sill, frame and wall before deciding what to remove.

PNNL describes assessing the existing window before rehabilitation and when to consider replacing the sash while keeping the frame. Product rules vary. Andersen’s service guidance provides an example of a manufacturer directing certain glass changes to a replacement sash. Ask about the service part for your model.

Get the scope in writing

For example, if one bid replaces a fogged glass unit and the other supplies a glazed sash, ask the second installer what condition or part availability led to that scope. Ask each installer to identify the part, what stays and any separate labor or finishing charges. Before authorizing work, check who handles a claim on your existing window.

Sources